CFL-FF008 Ashlar Stone
General Product Description
Dimensions and surface textures vary according to project specifications.
Fabrication and Installation
• All liners with depths greater than 1” are normally fabricated from fiberglass; liners with depths less than 1” may be fabricated from fiberglass or rubber.
• CFL rubber liners can be factory-mounted to ½” HDO plywood or field laminated per CFL’s installation instructions.
• Fiberglass form liners shall be reinforced with wood or other suitable material on approximately 0.304m centers, or as otherwisespecified; please see website or call for Typical Fiberglass specifications.
Release Agents
Release agent must be approved and applied according to CFL’s installation instructions.
NO SUBSTITUTIONS WILL BE ALLOWED WITHOUT PRIOR WRITTEN APPROVAL FROM PROJECT ENGINEER